It’s Chiller Season  - January 2015
Share this newsletter
Contact Us

There are s o many types of Corrosion….

  • General or Uniform Corrosion
  • Crevice Corrosion
  • Stress-Corrosion Cracking
  • Galvanic Corrosion
  • Pitting Corrosion
  • Intergranular Corrosion
  • Microbiologically-Influenced Corrosion (MIC)

And the factors and mechanisms differ.

Heat Exchangers Info

Heat exchangers are susceptible to erosion damage and galvanic corrosion due to contact between the dissimilar metals.  When we leave this damage untreated, the operational efficiency of the system will be seriously undermined with the potential for complete deterioration of components.  If the galvanic corrosion proceeds too long before it is addressed you can get a leak all the way through the tubesheet and the fluid on one side will mingle with the fluid on the other.  This may not be a huge deal if both are water but usually one is refrigerant which might not be very good for the atmosphere or it could be a harmful chemical that should never be leaked.  So, best case scenario is a huge loss of efficiency and capacity in the heat exchanger.  Worst case scenarios include the release of radioactive steam and or catastrophic EPA fines.

Belzona® has the right solution to protect these units.  Our products are electrical insulators and provide outstanding barrier properties so all those types of corrosion I’ve listed above are no longer an issue.  Your component equipment is protected for the long haul.

For 2015 we have two automotive manufacturers and four universities specifying Belzona® on their tube sheets and water boxes.  One of the universities is coating seven of their units at the point of manufacture.  Trane now offers Belzona® coatings factory installed.  Coating your component equipment saves on lifecycle maintenance costs.  Belzona® reduces those dramatically.  

Give us a call when you open up your chillers and let us give you a viable, cost effective option to replacement to address the corrosion in your system.

As always, thank you for your continued support and please feel free to call us anytime.

Stephanie Rumford
srumford@rumfordgroup.com
937-435-4650
RumfordGroup.com


Time sure does fly, 35 years have gone by

On January 11, 1980 Rumford Industrial Group was incorporated, becoming the Great Lakes Region distributor for Belzona polymeric repair compounds and industrial protective coatings.

We are honored to know that you rely on us to repair, protect and improve your machinery, equipment, buildings and structures when things stop working.  We trust that you’ll allow us to continue to be a trusted business partner for the next 35 years and beyond.

On behalf of our employees and associates, thank you so very much for the opportunity to be of service.

Jim Rumford


Newsletter Subscription and Archives

Subscribe
View Archives

In keeping with our mission of “aggressive growth through education of clients and associates on solutions to Repair, Protect and Improve their physical assets”, we offer industry specific newsletters that target cost saving applications specific to your particular needs. Please take a moment to subscribe to any of the sixteen newsletters by clicking on the “Subscribe” button or check out our archives by clicking on the “View Archives” button.

We also welcome any comments, thoughts or ideas you may have.


In-Plant Seminars
FREE In Plant Seminar

Hit the "FREE In Plant Seminar" button above and we’ll swing by your site to discuss Belzona polymer repair and protective coating solutions that can extend the service life of your equipment and infrastructure. We’ll even bring you lunch!